D-Link DES-3550 Command Line Interface Reference Manual page 208

create access_profile
Purpose
Used to create an access profile on the Switch and to define which parts of each incoming
frame's header the Switch will examine. Masks can be entered that will be combined with the
values the Switch finds in the specified frame header fields. Specific values for the rules are
entered using the config access_profile command, below.
create access_profile [ ethernet { vlan | source_mac <macmask> |
Syntax
destination_mac <macmask> | 802.1p |ethernet_type } ip { vlan |
source_ip_mask <netmask> | destination_ip_mask <netmask> | dscp | [ icmp {type | code }
| igmp {type } | tcp {src_port_mask <hex 0x0-0xffff> | dst_port_mask <hex 0x0-0xffff> |
flag_mask [all | {urg | ack | psh | rst | syn | fin}]} | udp {src_port_mask <hex 0x0-0xffff> |
dst_port_mask <hex 0x0-0xffff>} | protocol_id_mask <hex 0x0 - 0xFF>
{user_define_mask <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff>} ] } | packet_content_mask {offset_0-15
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> |
offset_16-31 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>
| offset_32-47 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>
<hex 0x0-0xffffffff> | offset_48-63 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-
0xffffffff> <hex 0x0-0xffffffff> | offset_64-79 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> } ] [profile_id <value 1-255>]
Description
The create access_profile command is used to create an access profile on the Switch and to
define which parts of each incoming frame's header the Switch will examine. Masks can be
entered that will be combined with the values the Switch finds in the specified frame header fields.
Specific values for the rules are entered using the config access_profile command, below.
ethernet − Specifies that the Switch will examine the layer 2 part of each packet header.
vlan − Specifies that the Switch will examine the VLAN part of each packet header.
•
source_mac <macmask> − Specifies a MAC address mask for the source MAC address.
•
This mask is entered in a hexadecimal format.
destination_mac <macmask> − Specifies a MAC address mask for the destination MAC
•
address.
802.1p − Specifies that the Switch will examine the 802.1p priority value in the frame's
•
header.
ethernet_type − Specifies that the Switch will examine the Ethernet type value in each
•
frame's header.
DES-3550 Layer 2 Fast Ethernet Switch
204