D-Link DES-3550 Command Line Interface Reference Manual page 279

show authen server_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view authentication server groups currently set on the Switch.
DES-3550:4#show authen server_group
Command: show authen server_group
Group Name
---------------
Darren
tacacs
tacacs+
xtacacs
Total Entries : 4
DES-3550:4#
DES-3550 Layer 2 Fast Ethernet Switch
Used to view authentication server groups on the Switch.
show authen server_group <string 15>
This command will display authentication server groups currently
configured on the Switch.
This command will display the following fields:
Group Name: The name of the server group currently configured on
the Switch, including built in groups and user defined groups.
IP Address: The IP address of the server host.
Protocol: The authentication protocol used by the server host.
<string 15> - Enter an alphanumeric string of up to 15 characters to
define the previously created server group to be viewed.
Entering this command without the <string> parameter will display all
authentication server groups on the Switch.
None.
IP Address
---------------
10.53.13.2
10.53.13.94
(This group has no entry)
(This group has no entry)
Protocol
--------
TACACS
TACACS
275