D-Link DES-3550 Command Line Interface Reference Manual page 47

show snmp community
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the currently entered SNMP community strings:
DES-3550:4#show snmp community
Command: show snmp community
SNMP Community Table
Community Name
-------------------------------- ------------------------------- ------------
dlink
private
public
Total Entries: 3
DES-3550:4#
DES-3550 Layer 2 Fast Ethernet Switch
Used to display SNMP community strings configured on the Switch.
show snmp community {<community_string 32>}
The show snmp community command is used to display SNMP
community strings that are configured on the Switch.
<community_string 32> − An alphanumeric string of up to 32
characters that is used to identify members of an SNMP community.
This string is used like a password to give remote SNMP managers
access to MIB objects in the Switch's SNMP agent.
None.
View Name
ReadView
CommunityView
CommunityView
Access Right
read_write
read_write
read_only
43