D-Link DES-3550 Command Line Interface Reference Manual page 214

config access_profile
user_define <hex 0x0-0xfffffff> − Specifies a mask to be combined with the value found in the
Parameters
frame header using a logical AND operation.
packet_content_mask – Specifies that the Switch will mask the packet header beginning with
•
the offset value specified as follows:
offset_0-15 - Enter a value in hex form to mask the packet from the beginning of the packet
•
offset_16-31 - Enter a value in hex form to mask the packet from byte 16 to byte 32.
•
offset_32-47 - Enter a value in hex form to mask the packet from byte 32 to byte 47.
•
offset_48-63 - Enter a value in hex form to mask the packet from byte 48 to byte 63
•
offset_64-79 - Enter a value in hex form to mask the packet from byte 64 to byte 79.
•
port <portlist> - Specifies the ports on the Switch to permit or deny access for the rule.
permit - Specifies the rule permit access for incoming packets on the previously specified
•
port.
priority <value 0-7> − Specifies that the access profile will apply to packets that contain this
•
value in their 802.1p priority field of their header for incoming packets on the previously
specified port.
{replace_priority}
•
incoming packet on the previously specified port.
replace_dscp_with <value 0-63> − Allows you to specify a new value to be written to the
•
DSCP field of an incoming packet on the previously specified port.
deny - Specifies the rule will deny access for incoming packets on the previously specified
•
port.
delete access_id <value 1-65535> - Use this to remove a previously created access rule in a
•
profile id.
Only administrator-level users can issue this command.
Restriction
s
Example usage:
To configure the access profile with the profile ID of 1 to filter frames on port 7 that have IP addresses in the range
between 10.42.73.0 to 10.42.73.255:
DES-3550:4# config access_profile profile_id 1 add access_id 1 ip source_ip 10.42.73.1 port 7 deny
Command: config access_profile profile_id 1 add access_id 1 ip source_ip 10.42.73.1 port 7 deny
Success.
DES-3550:4#
DES-3550 Layer 2 Fast Ethernet Switch
th
to the 15 byte.
-
Allows you to specify a new value to be written to the priority field of an
210