Figure 1-5 PuTTY Configuration Dialog Box
c. Click Open. The Login dialog box is displayed. Enter the correct user name and
password to log in to the router, and then configure the router in the command line
window.
login as:zte
Further authentication required
zte@192.168.5.3's password:
ZXR10#
4. Verify the configurations.
Command
ZXR10#
– End of Steps –
SJ-20140504150128-007|2014-05-10 (R1.0)
************************************************************
Welcome to ZXR10 Intelligent Integrated Multi-Service Router
************************************************************
show ssh
Chapter 1 Device Connection management
of ZTE Corporation
Description
Shows the configuration state of SSH.
1-9
ZTE Proprietary and Confidential