Zte ZXR10 ZSR V2 Configuration Manual (System Management page 12

ZXR10 ZSR V2 Configuration Guide (System Management)
On the ZXR10 ZSR V2, run the following commands to configure optional Telnet
parameters:
Command
ZXR10(config)#
ZXR10(config)#
ZXR10(config)#
ZXR10(config)#
ZXR10(config)#
ZXR10(config)#
ZXR10#
ZXR10#
ZXR10#
>],[<port-number>],[{vrf <vrf-name>| dcn}],[dscp
<dscp-value>]}]|<domain-name>[{[<port-number>],[vrf
<vrf-name>],[dscp <dscp-value>]}]}
ZXR10#
me>],[vrf <vrf-name>],[<port-number>],[dscp <dscp-value
>]}]|<domain-name>[{[vrf <vrf-name>],[<port-number>],[dscp
<dscp-value>]}]}
SJ-20140504150128-007|2014-05-10 (R1.0)
line console idle-timeout <idle-time>
line console absolute-timeout <absolute-time>
line telnet idle-timeout <idle-time>
line telnet absolute-timeout <absolute-time>
line telnet access-class {ipv4 | ipv6}<acl-name>
line telnet max-link <max-number>
terminal length <length>
line telnet dscp <dscp-value>
telnet {<dest-address>[{[<source-address
telnet6 {<dest-address>[{[interface <interface-na
1-4
ZTE Proprietary and Confidential
Function
Configures the maximum idle
timeout period of the serial port.
Unit: minute, range: 0–1000,
default: 30.
Configures the maximum online
timeout period of the serial port.
Unit: minute, range: 0–10000,
default: 1440.
Configures the maximum idle
timeout period of Telnet. Unit:
minute, range: 0–1000, default:
120.
Configures the maximum online
timeout period of Telnet. Unit:
minute, range: 0–10000, default:
1440.
Configures the name of an
Access Control List (ACL) bound
to Telnet.
Configures the maximum
number of Telnet links. Range:
1–15, default: 15.
Configures the terminal window
height. Unit: line, range: 0–24.
Specifies the DSCP value of
control plane packets for the
IPv4/IPv6 Telnet server. Range:
0–63, default: 48.
Enables this router to log in to an
IPv4 Telnet server as a client.
<domain-name>: domain name
(Range: 1–128 characters).
Enables this router to log in to an
IPv6 Telnet server as a client.