Configuring User Management - Zte ZXR10 ZSR V2 Configuration Manual (System Management

ZXR10 ZSR V2 Configuration Guide (System Management)

4.2 Configuring User Management

This procedure describes how to configure user management functions.
Steps
1. Enter ADM_MGR configuration mode, and configure user management parameters.
Step
1
2
3
4
5
6
7
8
9
2. Configure an authentication template.
SJ-20140504150128-007|2014-05-10 (R1.0)
Command
system-user
ZXR10(config)#
ZXR10(config-system-user)#
<0-15>
ZXR10(config-system-user)#
<length> character {[capital][lowercase][number][special
-character]}
ZXR10(config-system-user)#
fail-time <times> lock-minute <time>
ZXR10(config-system-user)#
{aaa|local} authentication-template <1
ZXR10(config-system-user)#
accounting-template <2001
ZXR10(config-system-user)#
ZXR10(config-system-user)#
<usergroup-name><username>{<password>| encrypted
<password>}
ZXR10(config-system-user)#
–
template <1 128> authortication-template<1
default-privilege-level
strong-password length
user-authen-restriction
global-enable-type
–
128>
account-switch {off | on
–
2128>}
user-default
user-group special
login ascii authentication-
–
128>
4-2
ZTE Proprietary and Confidential
Function
Enters user management
configuration mode.
Configures the default
privilege level.
Configures a strong password.
Range: 6–32 characters. A
password needs to contain
any one type or several types
of the following characters:
uppercase letters, lowercase
letters, numbers, and special
characters.
Locks the user after user
authentication has failed
consecutively. Range of the
number of failure times: 3–6,
range of locking time period:
1–1440 min.
Configures the global-enable
mode for users.
Configures the global
accounting mode.
Enters the default user
configuration mode.
Configures user group
information.
Configures the ASCII
authentication template.