Zte ZXR10 ZSR V2 Configuration Manual (System Management page 44

ZXR10 ZSR V2 Configuration Guide (System Management)
Command
ZXR10#
ZXR10#
ZXR10#
ZXR10#
– End of Steps –
Example
The user-password recover-remind command that is used to configure user password
recovery reminders is an interactive command. The following provides examples of this
command.
eg1:
ZXR10(config-system-user)#user-password recover-remind zte
password is:***
question:what is your name
answer:***
ZXR10(config-system-user)#
eg2:
ZXR10(config-system-user)#user-password recover-remind zte
password is:***
%Error 59958: Password is wrong!
ZXR10(config-system-user)#
eg3:
ZXR10(config-system-user)#user-password recover-remind zte
password is:***
question:question is 012345678901234567890124567890123456789
%Error 59959: Question has been to upper limit!The limit is 50 characters!
ZXR10(config-system-user)#
SJ-20140504150128-007|2014-05-10 (R1.0)
show authen-restriction userinfo
show login
show login state [{[telnet]|[ssh]|[ftp]}]
show login failure [{[telnet]|[ssh]|[ftp]}]
Function
Displays information on locked users and
users who have failed authentication. The
information includes user names, numbers
of authentication failure times, status
(locked or not locked), and remnant locking
time.
Displays configurations of the anti-attack
monitoring function.
Displays the status of the anti-attack
monitoring function and its statistical
information.
Displays information on failed login
attempts of the anti-attack monitoring
function.
4-6
ZTE Proprietary and Confidential