Figure 10-4 Ntp Working As A Server - Zte ZXR10 ZSR V2 Configuration Manual (System Management

Chapter 10 Clock and Clock Synchronization
Configuration Command
Configuration on R1:
R1(config)#ntp enable
R1(config)#ntp server 192.168.5.93 priority 1
Configuration Verification
After the configuration, use the show command to check the configuration.
R1#show running-config ntp
! <ntp>
ntp server 192.168.5.93 priority 1
ntp enable
! </ntp>
10.1.3.2 NTP Working as a Server
Configuration Description
The function of NTP is to synchronize clocks of different network members. As shown in
Figure 10-4, NTP works as a server to provide synchronization information for the client.

Figure 10-4 NTP Working as a Server

Configuration Flow
1. Enable NTP on R1, and configure the address of the NTP server.
2. Enable NTP on R2, and configure a level of the NTP server.
Configuration Command
The configuration on R1:
R1(config)#ntp enable
R1(config)#ntp server 192.168.5.93 priority 1
The configuration on R2:
R2(config)#ntp enable
R2(config)#ntp master 1
10-5
SJ-20140504150128-007|2014-05-10 (R1.0) ZTE Proprietary and Confidential