Figure 15-7 Ip Ping Configuration Example - Zte ZXR10 ZSR V2 Configuration Manual (System Management

size <datagram-size>: size of a ping packet, range: 36–8192, default: 100 bytes.
timeout <timeout>: timeout period, unit: second, range: 1–20.
tos <tos>: Type of Service (ToS) of a sent packet, range: 0–255, default: 0.
ttl <ttl>: Time To Live (TTL), range: 1–255.
df-bit <don't-frag>: flag indicating no fragmentation, options: 0, 1, default: 0 (indicating
that fragmentation is allowed).
pattern <pad>: value of the pad field in a packet.
option: whether to configure the IP options. The value 1 means that IP options can be
configured.
speed limite <limite-num>: number of ping packets sent per second.
speed interval<interval-seconds>: interval between two data request packets, unit: second,
range: 2–10.
loose | strict <source-route-address>: specified source station route, format: dotted decimal.
record <record-hops>: maximum number of hops that needs to be recorded, range: 1–9.
timestamp <record-timestamps>: maximum number of timestamps that needs to be
recorded, range: 1–9.
Maintenance Commands
To maintain IP Ping, run the following command on the ZXR10 ZSR V2:
Command
debug ip icmp
ZXR10#
Configuration Example
l
Configuration Description
As shown in
use the ping command to test the connectivity.

Figure 15-7 IP Ping Configuration Example

l
Configuration Flow
1. Enter interface configuration mode and configure IP addresses on the interfaces
for communication.
SJ-20140504150128-007|2014-05-10 (R1.0)
Figure 15-7, two interfaces on two devices in the same network segment
15-11
Chapter 15 Network Layer Detection
Function
Displays the information on ICMP packets
sent and received when the ping command
is run.
ZTE Proprietary and Confidential