Zte ZXR10 ZSR V2 Configuration Manual (System Management page 37

l Configuration Flow
1. Configure the exclusive function to avoid collision.
2. Change the command commit mode to the manual mode.
3. Enter configuration commands by running a script.
4. Commit the commands.
l
Configuration Commands
ZXR10#configure exclusive
ZXR10#conf t
Enter configuration commands, one per line.
ZXR10(config)#mu c
%Info 140359: Allow others to configure, must avoid conflict.
ZXR10(config)#commit-mode manual
/*Enters configuration commands by running a script. The process is omitted.*/
ZXR10(config)#commit
l
Configuration Verification
Check whether all the commands have been committed and become effective by
running the show command.
SJ-20140504150128-007|2014-05-10 (R1.0)
End with CTRL/Z.
3-3
ZTE Proprietary and Confidential
Chapter 3 MIM Configuration