Syslog Configuration Example - Zte ZXR10 ZSR V2 Configuration Manual (System Management

ZXR10 ZSR V2 Configuration Guide (System Management)
Step
2
3
4
<level>: the lowest alarm level, ranges: DEBUGGING (level 8), INFORMATIONAL
(level 7), NOTIFICATIONS (level 6), WARNINGS (level 5), ERRORS (level 4),
CRITICAL (level 3), ALERTS (level 2), and EMERGENCIES (level 1), default:
NOTIFICATIONS.
<server-ip>: IP address of the Syslog server, type: IPv4 or IPv6.
<fport>: remote port number, range: 1–65535, default: 514.
<lport>: local port number, range: 514, 1024–65535, default: 514.
[alarmlog][cmdlog][debugmsg][servicelog][braslog][natlog]: type of logs reported to the
Syslog server.
2. Verify the configurations.
Command
ZXR10#
ZXR10#
exclude | include}<line>]
– End of Steps –

8.3 Syslog Configuration Example

Configuration Description
The function of Syslog is sending alarms to the Syslog server in the specified format. After
the Syslog function is configured on the ZXR10 ZSR V2, alarms will be sent to the Syslog
server, see
SJ-20140504150128-007|2014-05-10 (R1.0)
Command
syslog-server facility <facility>
ZXR10(config)#
syslog-server source {ipv4|ipv6}<sour
ZXR10(config)#
ce-ip>
syslog-server host [vrf <vrf-name>]<serv
ZXR10(config)#
er-ip>[fport <fport>][lport <lport>][alarmlog][cmdlog][de
bugmsg][servicelog][braslog][natlog]
show logging configuration
show running-config alarm [all ||{begin |
Figure 8-1.
Function
Displays all Syslog configurations.
Displays all Syslog configurations by using
a regular expression.
8-2
ZTE Proprietary and Confidential
Function
Configures the reporting
source of Syslog messages.
Range: ftp, ntp, user, and so
on, default: local0.
Configures the source
address of reporting Syslog
messages. Type: IPv4 or
IPv6.
Configures Syslog parameters
including the IP address and
port number of the Syslog
server, the port number of the
client, and the type of sent
logs.