Ip Performance Maintenance - Zte ZXR10 ZSR V2 Configuration Manual (System Management

PE1(config)#mpls l2vpn enable
PE1(config)#pw pw1
PE1(config)#vpls zte1
PE1(config-vpls-zte1)#pseudo-wire pw1
PE1(config-vpls-zte1-pw-pw1)#neighbour 100.10.10.2 vcid 10
PE1(config-vpls-zte1-pw-pw1-neighbour-100.10.10.2)#end
PE1(config)#zmac-oam enable
Configurations on PE2 are similar to those on PE1.
l
Configuration Verification
Run the mac-trace command on PE1. The execution result is displayed as follows:
PE1#mac-trace 00d0.d000.0500 vpls zte1 peer 100.10.10.2
Starting L2 Trace to 00d0.d000.0500
PE1
PE2
[finished]

15.13 IP Performance Maintenance

ZXR10 ZSR V2 provides the following commands to maintain IP performance.
Command
debug ip
ZXR10#
debug ip interface
ZXR10#
show debug ip
ZXR10#
SJ-20140504150128-007|2014-05-10 (R1.0)
/*Enable mac-ping (trace) globally.*/
:gei-1/1 [002e.33d5.3f51]->
:gei-1/1 [00d0.d000.0500] !
Function
This enables IP debug function. It displays the debug
information of IP processing and whether the route is
sending or receiving IP packets.
This enables IP debug function in the specified
interface.
This shows all the enabled IP debug functions.
15-37
Chapter 15 Network Layer Detection
ZTE Proprietary and Confidential