Rmon Configuration Example - Zte ZXR10 ZSR V2 Configuration Manual (System Management

Step
1
2
3
<interface-name>: interface name, only supporting an Ethernet interface.
<index-number>: index number, range: 1–65535.
<statistics-owner>: the creator of the statistics, range: 1–31 characters, default:
monitor.
<bucket-number>: the size of the requested loop bucket, default: 50, range: 1–100.
<event-owner>: the creator of the event, range: 1–31 characters, default: config.
<interval-seconds>: sampling interval, unit: second, range: 10–3600, default: 1800. It
is recommended to use 30 s and 1800 s to collect short-term and long-term network
traffic changes respectively.
<history-owner>: the creator of this line of history, range: 1–31 characters, default:
monitor.
3. Verify the configurations.
Command
ZXR10(config)#
tatistics]]
ZXR10(config)#
| exclude | include}<line>]
– End of Steps –

9.3 RMON Configuration Example

Configuration Description
As shown in
the gei-3/2 interface on the ZXR10 2800-4, and provide the following functions:
SJ-20140504150128-007|2014-05-10 (R1.0)
Command
rmon
ZXR10(config)#
interface <interface-name>
ZXR10(config-rmon)#
ZXR10(config-rmon-interface)#
statistics <index-number>[owner <statistics-owner>]
ZXR10(config-rmon-interface)#
collection history <index-number>[buckets
<bucket-number>][interval <interval-seconds>][owner
<history-owner>]
show rmon [[events],[history],[alarms],[s
show running-config rmon [all ||{begin
Figure 9-1, it is required to enable the RMON function, monitor the traffic of
Chapter 9 RMON Configuration
rmon collection
rmon
Function
Displays RMON configurations and
version information.
Displays RMON configurations.
9-3
ZTE Proprietary and Confidential
Function
Enters RMON mode from
configuration mode.
Enters RMON interface mode from
RMON mode.
Enables the interface statistics
function (only applicable to
Ethernet interfaces).
Enables the interface history
collection function (only applicable
to Ethernet interfaces).