Zte ZXR10 ZSR V2 Configuration Manual (System Management page 114

ZXR10 ZSR V2 Configuration Guide (System Management)
Step
1
2
3
4
5
6
2. Collect statistics of performance management.
Command
ZXR10#
ZXR10#
ZXR10#
[<interface-name>]
ZXR10#
ZXR10#
SJ-20140504150128-007|2014-05-10 (R1.0)
Command
intf-statistics
ZXR10(config)#
ZXR10(config-intf-statistics)#
ak_value {disable | enable}{<interface-name>| default}
ZXR10(config-intf-statistics)#
ak_value_clear [<interface-name>]
ZXR10(config-intf-statistics)#
{enable | disable}
performance data-save-interval
ZXR10(config)#
{15min,5min}
performance update-interval
ZXR10(config)#
<periodreport><interface-checkPtType>
clear statistics interface [<interface-name>]
ZXR10#
show running-config performance
show interface <interface-name>
show performance one_minute_peak_value
show performance data-save-interval
show ip traffic
one_minute_pe
one_minute_pe
traffic-statistics
Function
Displays the configuration information
on performance management.
Displays the state of all interfaces or
a specified interface.
Displays the one-minute peak-value
of an interface.
Displays the period for saving history
performance data.
Displays IP statistics information.
11-2
ZTE Proprietary and Confidential
Function
Enters interface statistic
configuration mode.
Enables or disables the switch to
control the one-minute peak-value
counter on a specific Ethernet
interface or all Ethernet interfaces.
Clears and resets the one-minute
peak-value counter on a specific
Ethernet interface or all Ethernet
interfaces.
Enables the interface performance
statistic function. Default:
enabled.
Sets the period for saving data.
Unit: minute, default: 15.
Sets the interval for sampling data
from a PMA to a PMS. Default:
10 s. Sets the type of a specified
detection point or sets the type of
all detection points by using the
default configuration.
Clears the performance value
of a specific interface or the
accumulative performance value
of all interfaces.