Zte ZXR10 ZSR V2 Configuration Manual (System Management page 144

ZXR10 ZSR V2 Configuration Guide (System Management)
Step
2
3
4
5
6
2. Configure LLDP in interface configuration mode.
Step
1
2
SJ-20140504150128-007|2014-05-10 (R1.0)
Command
hellotime <times>
ZXR10(config-lldp)#
holdtime <time>
ZXR10(config-lldp)#
maxneighbor <num>
ZXR10(config-lldp)#
lldp {enable | disable}
ZXR10(config-lldp)#
lldp-rx {enable | disable}
ZXR10(config-lldp)#
lldp-tx {enable | disable}
ZXR10(config-lldp)#
txcreditmax <credit>
ZXR10(config-lldp)#
txfastinit <num>
ZXR10(config-lldp)#
msgfasttx <interval>
ZXR10(config-lldp)#
Command
ZXR10(config-lldp-if-interface-name)#
{enable | disable}
ZXR10(config-lldp-if-interface-name)#
{enable | disable}
lldp
lldp-rx
14-4
ZTE Proprietary and Confidential
Function
This configures the interval to
send LLDP neighbor discovery
packets. It is in the unit of second,
and it is in the range of 5–32768,
the default value is 30.
This configures the hold-time of
an LLDP neighbor. The <times>
parameter is a multiple of the
interval to send LLDP neighbor
discovery packets. It is in the
range of 2–10, and the default
value is 4.
This configures the maximum
number of neighbors that can be
discovered by LLDP, in the range
of 1–128, with the default value of
128.
Enables/Disables LLDP function.
Enables/Disables LLDP function.
Enables/Disables LLDP send
function.
This configures the maximum
credit number, in the range of
1-10, with the default value of 5.
This configures the packets
number of fast transmit, in the
range of 1-8, with the default value
of 4.
This configures the interval of fast
transmit packets, in the range of
1-3600, with the default value of
1s.
Function
Enables/Disables LLDP in an
interface.
Enables/Disables LLDP receive
function in an interface.