Zte ZXR10 ZSR V2 Configuration Manual (System Management page 90

ZXR10 ZSR V2 Configuration Guide (System Management)
snmp-server security dynamic-trust-user idle-timeout 1800
snmp-server version v2c enable
snmp-server input-limit 200
R1(config)#show logging alarm
An alarm 100401 ID 100 level 5 cleared at 06:37:35 03-10-2000 sent
by R1 MPFU-8/0
%CPS% The upsend packet flow of control plane reached quota limit!
Interface = gei-8/5, flowtype = multi-hop-access, current value = 0,
quota value = 100
An alarm 100401 ID 100 level 5 occurred at 06:36:55 03-10-2000
sent by R1 MPFU-8/0
%CPS% The upsend packet flow of control plane reached quota limit!
Interface = gei-8/5, flowtype = multi-hop-access,
current value = 12867, quota value = 100
An alarm 50901 ID 99 level 5 cleared at 06:36:44 03-10-2000 sent
by R1 MPFU-8/0 %LACP% LACP interface active status The interface
(index = 66, name = gei-8/6) turns into ACTIVE
An alarm 150101 ID 96 level 5 cleared at 06:36:44 03-10-2000
sent by R1 MPFU-8/0
%IP% Interface status The interface(index=75,name='smartgroup1')
turned into protocol UP
An alarm 50901 ID 99 level 5 occurred at 06:36:26 03-10-2000
sent by R1 MPFU-8/0
%LACP% LACP interface active status
The interface (index = 66, name = gei-8/6) turns into INACTIVE
An alarm 400123 ID 98 level 2 cleared at 06:36:25 03-10-2000 sent
by R1 MPFU-8/0
%BOARD% Slot offline The slot = 4 is online
--More--
The terminal monitor command displays real-time alarms. The show logging alarm
command displays buffered alarms.
7-10
SJ-20140504150128-007|2014-05-10 (R1.0) ZTE Proprietary and Confidential