Zte ZXR10 ZSR V2 Configuration Manual (System Management page 83

Step
7
8
9
10
11
12
13
14
<level>: the lowest alarm level, range: DEBUGGING (level 8), INFORMATIONAL
(level 7), NOTIFICATIONS (level 6), WARNINGS (level 5), ERRORS (level 4),
CRITICAL (level 3), ALERTS (level 2), and EMERGENCIES (level 1).
<time1>: interval of reporting to FTP, range: 1:00:00–23:59:59.
<time2>: daily time for reporting to FTP, range: 00:00:00–23:59:59.
SJ-20140504150128-007|2014-05-10 (R1.0)
Command
logging alarmlog-interval <
ZXR10(config)#
minute>
logging cmdlog-interval <
ZXR10(config)#
second>
logging ftp <level>[ vrf
ZXR10(config)#
<vrf-name>]<ip-address><username><password
>[<filename>]
logging filesavetime
ZXR10(config)#
{interval <time1>| everyday <time2>|
week <weekday><time3>| month
<mothday><time4>}[vrf <vrf-name>]<ftp-se
rver><username><password>[<filename>]
logging mode {fullclear |
ZXR10(config)#
fullcycle | fullend}
alarm heartbeat-send <type>
ZXR10(config)#
alarm heartbeat-period <
ZXR10(config)#
minute>< type>
alarm level-change
ZXR10(config)#
<alarm-code><level>
Chapter 7 Alarm Management Configuration
Function
Sets the time interval for writing alarm
records from the buffer to files. Unit:
minute, range: 10–30000, default: 10.
Sets the time interval for writing
command logs from the buffer to log
files. Unit: second, range: 2–30000,
default: 2.
Configures the level of reporting
alarms to the File Transfer Protocol
(FTP) server, IP address of the FTP
server, username, password, and file
name. By default, alarms are not
reported.
Configures the time when alarms
written in files are sent to the FTP
server, IP address, username, and
password of the FTP server, and file
name prefix. By default, alarms are
not reported.
Sets the mode for clearing buffer data
after the alarm buffer is full. Default:
fullcycle.
Sends an alarm heartbeat keep-alive
packet to the configured destination
immediately.
Configures the interval of sending
alarm heartbeat packets. Unit: minute,
range: 0–30000, default: 0 (no
heartbeat packet is sent).
Modifies the corresponding alarm
level of the alarm code. Each alarm
code has a default level. Range:
1–4294967294.
7-3
ZTE Proprietary and Confidential