Zte ZXR10 ZSR V2 Configuration Manual (System Management page 43

4. Create a user, and bind an authentication template and authorization template.
Step
1
2
3
4
5
6
7
5. Configure other parameters in global mode.
Command
ZXR10(config)#
<unencrypted-password>| 5 <encrypted-password>|<un
encrypted-password>}
ZXR10(config)#
attempts <tries> within <seconds>
ZXR10(config)#
ipv6-access-list ><access-list-name>
ZXR10(config)#
<failure-tries>]
6. Verify the configurations.
Command
ZXR10#
ZXR10#
SJ-20140504150128-007|2014-05-10 (R1.0)
Command
ZXR10(config-system-user)#
ZXR10(config-system-user-username)#
authentication-template <1
ZXR10(config-system-user-username)#
authorization-template <1
ZXR10(config-system-user-username)#
{<pwd>|encrypted <pwd>}
ZXR10(config-system-user-username)#
over-remind
ZXR10(config-system-user-username)#
uration <days>
ZXR10(config-system-user-username)#
ord
enable secret level <1-18>{0
login block <block-seconds>
login quiet-mode < ipv4-access-list |
login on-failure alarm [every
show running-config adm-mgr [all]
show user-group [special <usergroup-name>]
user-name <name>
bind
–
128>
bind
–
128>
password
password-rec
password-d
once-passw
Function
Sets passwords of all login privilege levels.
Configures and activates the remote login
anti-attack monitoring function.
Configures an ACL for the quiet period.
Configures generating log information
or Trap information when failed login
attempts exist.
Function
Displays user management configurations.
Displays configured user group information.
4-5
Chapter 4 User Management
Function
Configures a user name, and
enters use name configuration
mode.
Binds a user management
authentication template.
Binds a user management
authorization template.
Configures a password.
Configures information for
password recovery.
Configures a password
validity period. The parameter
0 indicates never expiration.
Range: 90–360 days.
Configures a rule that a
password should be changed
at the first login.
ZTE Proprietary and Confidential