Command
ZXR10#
– End of Steps –
11.3 Performance Management Configuration Example
Configuration Description
Performance management can modify interface count update time or set count switch
according to user requirement. As shown in
gei-2/1 of R2.
Figure 11-1 Performance Management Configuration Example Topology Diagram
Configuration Flow
1. Check the count of interface gei-2/1. To check the new count, clear the previous count.
2. Modify the time interval of sampling data from PMS to PMA to control count update
time interval of gei-2/1.
Configuration Command
1. Clear gei-2/1 interface count:
ZXR10#clear statistics interface gei-2/1
2. Set count update time of physical port such as gei-2/1 as 30 seconds.
ZXR10(config)#performance update-interval 30s ethernet
Configuration Verification
Check whether the configuration is valid.
ZXR10(config)#show running-config performance
! <performance >
performance update-interval 30s ethernet
! </performance >
SJ-20140504150128-007|2014-05-10 (R1.0)
show tcp statistics
Chapter 11 Performance Statistics
Function
Displays TCP statistics information.
Figure
11-1, flow is sent from gei-2/1 of R1 to
11-3
ZTE Proprietary and Confidential