Configuring The Zxr10 Zsr V2 As An Sftp Client - Zte ZXR10 ZSR V2 Configuration Manual (System Management

ZXR10 ZSR V2 Configuration Guide (System Management)
2. On the SFTP server, set the root directory of SFTP to /datadisk0/BAK/.
3. On the SFTP server, configure the zte user name and password.
4. Download a file from the SFTP server to verify the SFTP server function.
l
Configuration Commands
Run the following commands on the ZXR10 ZSR V2. For how to configure a user
name and password, refer to "Chapter 4 User Management".
/*The configuration commands on the SFTP server are as follows:*/
R1#configure terminal
R1(config)#ssh server enable listen 49152
R1(config)#sftp-server top-directory /datadisk0/BAK/
R1#dir BAK
Directory of MPFU-8/0: /datadisk0/BAK
897636
1
2
3
/*Downloads a file from the SFTP client.*/
R2#copy sftp vrf mng //169.1.219.14/0130.txt@zte:zte
root: /datadisk0/0130.txt encrypt 3des compress zlib mac md5 49152
Start copying file
.
Got file successfully!

1.7.2 Configuring the ZXR10 ZSR V2 as an SFTP Client

This procedure describes how to configure the ZXR10 ZSR V2 as an SFTP client.
Prerequisite
The ZXR10 ZSR V2 can access the SFTP server network.
Steps
1. Configure an SFTP.
Start the SFTP server software.
communicates with the SFTP server.
2. Upload or download a file through the ZXR10 ZSR V2.
SJ-20140504150128-007|2014-05-10 (R1.0)
KB total (892760 KB free)
attribute size
<DIR> 160
<DIR> 160
---- 615
date time
01-15-2014 08:43
01-15-2014 08:43
01-15-2014 15:08
Functioning as a client, the ZXR10 ZSR V2
1-18
name
.
..
0130.txt
ZTE Proprietary and Confidential