Ftp-Type Sqa Configuration Example; Figure 13-2 Ftp-Type Sqa Configuration Example - Zte ZXR10 ZSR V2 Configuration Manual (System Management

Chapter 13 SQA Configuration
R1(config)#sqa-test 1
R1(config-sqa-1)#type-icmp 10.1.0.2
R1(config-sqa-1)#sqa-begin now
%Info 757: The sqa test is starting now, please wait a moment for test result......
R1(config-sqa-1)#
Configuration Verification
The configuration and test result are shown below.
R1#show sqa-test 1
test number:1
test type: ICMP
destination IP: 10.1.0.2
repeat:1
tos:0
ttl: 255
size: 36
interval time:100
send trap:disable
R1#show sqa-result icmp
icmp test[1] result
SendPackets:1 ResponsePackets:1
Completion:success Destination IP Address: 10.1.0.2
Min/Max/Avg/Sum RTT:29/99/39/787ms
Min/Max/Avg/Sum Positive Jitter:1/7/3/9ms
Min/Max/Avg/Sum Negative Jitter:1/70/35/71ms
Min/Max/Avg/Sum Jitter:1/70/16/80ms
Packet loss rate:0%
Last Probe Time:2012-11-18 01:57:38

13.3.2 FTP-Type SQA Configuration Example

Configuration Description
As shown in Figure 13-2, there is a link between the FTP server and R1. Packets between
them can be forwarded properly. It is required to enable the FTP server function on FTP
server, and configure a user name and password.

Figure 13-2 FTP-Type SQA Configuration Example

13-5
SJ-20140504150128-007|2014-05-10 (R1.0) ZTE Proprietary and Confidential