Tcp-Type Sqa Configuration Example - Zte ZXR10 ZSR V2 Configuration Manual (System Management

ZXR10 ZSR V2 Configuration Guide (System Management)
Configuration Flow
1. Create an SQA test instance.
2. Enter the SQA test instance, and configure the FTP test attributes for the test instance
including FTP server address, user name, password, source file name, destination
path and destination file name.
3. Set the SQA test start time to now or a scheduled time.
4. Check the test result.
Configuration Command
Run the following commands on the ZXR10 ZSR V2:
R1(config)#sqa-test 2
R1(config)#type-ftp copy 1.1.1.1 filename abc.txt root /datadisk0/abc.txt
R1(config)#type-ftpusername whopassword who
R1(config-sqa-2)#sqa-begin now
%Info 757: The sqa test is starting now, please wait a moment for test result......
R1(config-sqa-2)#
Configuration Verification
Run the show command to check the configurations and test results. The execution result
is displayed as follows
R1#show sqa-test 2
test number:2
test type: FTP
ftp IP:10.1.0.2
username:who
password: 9654d35c7f907ad5c1a1f803d1e4a21c667d8939cade03478bad7db48099d0e4
/*Encrypted*/
filename:abc.txt
root:/datadisk0/abc.txt
send Trap:disable
R1#show sqa-result ftp
ftp test[2] result
Completion:success
Last RTT:127s
Last Probe Time:2012-07-29 09:22:58

13.3.3 TCP-Type SQA Configuration Example

Configuration Description
As shown in
can be forwarded properly. Enable a monitoring port pf SQA-TCP-server on R3.
SJ-20140504150128-007|2014-05-10 (R1.0)
Bytes read:4817497
Figure 13-3, there is a link between R1 and R3. Packets between R1 and R3
13-6
ZTE Proprietary and Confidential