Zte ZXR10 ZSR V2 Configuration Manual (System Management page 150

ZXR10 ZSR V2 Configuration Guide (System Management)
Command
ZXR10(config)#
Maintenance Commands
To maintain the ICMP fast response function, run the following commands on the ZXR10
ZSR V2:
Command
debug ip icmp
ZXR10#
debug ip icmp detail
ZXR10#
debug ip interface<interface-name>
ZXR10#
debug ip
ZXR10#
show debug icmp
ZXR10#
show debug ip
ZXR10#
show ip traffic
ZXR10#
clear ip traffic
ZXR10#
Configuration Example
l
Configuration Description
As shown in
directly. The ICMP fast response (ping) function is required between R1 and R2.
SJ-20140504150128-007|2014-05-10 (R1.0)
ip icmp-fast-reply
Figure 15-1, the interface gei-1/1 of R1 is connected to gei-1/1 of R2
15-2
Function
Enables the ICMP fast response (ping)
function. This function is enabled by
default.
Function
Enables the ICMP debug function, which
displays debug information on ICMP
processing, and at the same time disables
the ICMP fast ping function.
Enables the ICMP debug function, which
displays detailed debug information on
ICMP processing, and at the same time
disables the ICMP fast response function.
Enables the IP debug function on the
configuration interface, which displays
debug information on IP processing, and
at the same time disables the ICMP fast
response function.
Enables the IP debug function, which
displays debug information on IP-layer
processing, and at the same time disables
the ICMP fast response function.
Displays the enabled ICMP debug
functions.
Displays the enabled IP debug functions.
Displays statistics of received and sent
packets at the IP, ICMP, UDP, and TCP
layers.
Clears statistics of received and sent
packets at the IP, ICMP, UDP, and TCP
layers.
ZTE Proprietary and Confidential