Zte ZXR10 ZSR V2 Configuration Manual (System Management page 19

Command
ZXR10(config)#
<port-number>]
2. Configure other FTP attributes.
Command
ZXR10(config)#
<directory>[{read-only |{[read-write],[copy]}}]
ZXR10(config)#
[ipv6]<acl-name>
ZXR10(config)#
For how to configure an FTP server user name and password, refer to "Chapter 4 User
Management".
3. Verify the configurations.
Command
ZXR10#
4. Maintain the FTP Server.
Command
ZXR10(config)#
– End of Steps –
Example
The following gives an FTP server configuration example.
l
Configuration Description
As shown in
server. The PC functions as an FTP client that uploads and downloads files.
SJ-20140504150128-007|2014-05-10 (R1.0)
ftp-server enable [listen
ftp-server top-directory
ftp-server access-class
ftp-server max-login <max-number>
show ftp-server
ftp-server kick-user <user-id>
Figure 1-7, ZXR10 ZSR V2 is connected to a PC and operates as an FTP
Chapter 1 Device Connection management
Function
Enables the FTP server function, and
monitors the specified port.
The port range is 21 or 2401–2420.
Function
Sets the top-level directory that the
FTP server allows users to access
through FTP. By default, the directory is
/datadisk0/.
Binds an ACL to the FTP server.
Configures the maximum number of
online users of the FTP server.
Function
Shows the configuration information on
the FTP server.
Function
Disconnects a currently online user. The
parameter value is an online user ID.
1-11
ZTE Proprietary and Confidential