Zte ZXR10 ZSR V2 Configuration Manual (System Management page 133

In a DNS test, range: 1–10, default: 1. In an ICMP jitter test, range: 1–65535, default:
1.
<tos-value>: ToS value, range: 0–255, default: 0.
<ttl-value>: Time To Live (TTL) value, range: 1–255, default: 255.
<size-value>: size of a packet. In an ICMP test, range: 36–8192 bytes, default: 36
bytes. In a UDP test, range: 50–1500 bytes, default: 50 bytes. In an ICMP jitter test,
range: 40–8192 bytes, default: 40 bytes.
<interval-value>: interval between two packets, unit: ms. In an ICMP test, range:
50–65535, default: 100. In a UDP test, range: 50–2000, default: 100. In a TCP test,
range: 1000–4000, default: 1000. In an ICMP jitter test, range: 50–65535, default:
100.
<destination-port>: Destination port number, range: 1025–65535.
<user-name>: user name of the FTP server, range: 1–31 characters.
<ftp-server-password>: clear text password of the FTP server, range: 1–31 characters.
<ftp-server-encrypted-password>: cipher text password of the FTP server, range: 64
characters.
<file-name>: FTP source file name, range: 1–79 characters.
<local-path>/<file-name>: FTP local path and file name, range: 1–151 characters.
<destination-url>: domain name to be resolved, range: 1–128 characters.
<dns-ip-address>: DNS IP address.
2. Start an SQA test, and enable the Trap alarm.
Step
1
2
3. Configure an SQA TCP or UDP server.
Command
ZXR10(config)#
SJ-20140504150128-007|2014-05-10 (R1.0)
Command
sqa-begin {now | timerange
ZXR10(config-sqa)#
<timerange-name>}
send-Trap { enable <percent>}
ZXR10(config-sqa)#
sqa-tcp-server <ipaddress><port>
Function
Configures an SQA TCP server. (This
configuration is required when you
select a TCP test.)
13-3
ZTE Proprietary and Confidential
Chapter 13 SQA Configuration
Function
Starts a test in SQA mode.
The sqa-stop command stops
the test. If now is selected,
the test is started immediately.
Enables the Trap alarm
in SQA mode. <percent>:
alarm threshold value, range:
1–100.