Rear Panel Of An Mx150; Figure 2: Mx150 Front Panel Components; Related Documentation - Juniper MX150 Hardware Manual

MX150 3D Universal Edge Router Hardware Guide
Related
Documentation

Rear Panel of an MX150

6
1 RJ-45 console port
1 USB port
1-Gigabit management port
4 system status LEDs
3 port parameter LEDs
1 Mode button

Figure 2: MX150 Front Panel Components

1— 1-Gigabit Ethernet RJ-45 network ports
2— Link and Status LEDs for SFP and SFP+
ports
3— Mini-USB console port
4— Console (CON) port
5— USB port
CAUTION: Do not use the
under the direction of Juniper Networks Technical Assistance Center (JTAC).
Chassis Status LEDs on MX150 on page 7
Cooling System and Airflow in an MX150 on page 13
Prevention of Electrostatic Discharge Damage on page 151
Connecting an MX150 to a Network for Out-of-Band Management on page 89
The rear panel of the MX150 consists of the following components (see
Figure 3 on page 7):
Ground area
Electrostatic discharge (ESD) point
Exhaust vents
1 2
10 9
6— 1-Gigabit management (mgmt) port
7— system status LEDs and port parameter
LEDs
8— Mode button
9— 1/10-Gigabit SFP+ uplink ports
10— 1-Gigabit SFP network or uplink ports
button to restart the power sequence unless
Reset
Copyright © 2017, Juniper Networks, Inc.
3 4 5 6 7
8