Mx10008 Cable Specifications For Console And Management Connections; Understanding Fiber-Optic Cable Signal Loss, Attenuation, And Dispersion - Juniper MX10008 Hardware Manual

MX10008 Cable Specifications for Console and Management Connections

Table 46 on page 120 lists the specifications for the cables that connect the MX10008 line of routers to a
management device.
NOTE: The MX10008 router can be configured with SFP management ports that support
1000BASE-SX transceivers.
Table 46: Cable Specifications for Console and Management Connections for the MX10008 Router
Port on
MX10008 router Cable Specification
Console port RS-232 (EIA-232) serial
cable
Management port Category 5 cable or
equivalent suitable for
1000BASE-T operation
SEE ALSO
Console Port Connector Pinouts for an MX10008 Router | 125
Management Port Connector Pinouts for the MX10008 Router | 127
Connecting an MX10008 Router to a Management Console | 166
Connecting an MX10008 to a Network for Out-of-Band Management | 165

Understanding Fiber-Optic Cable Signal Loss, Attenuation, and Dispersion

IN THIS SECTION
Signal Loss in Multimode and Single-Mode Fiber-Optic Cables | 121
Attenuation and Dispersion in Fiber-Optic Cable | 121
Cable Supplied
One 7-foot (2.13-meter) long
RJ-45 patch cable and RJ-45
to DB-9 adapter
One 7-foot (2.13-meter) long
RJ-45 patch cable
Maximum Device
Length Receptacle
7 feet RJ-45
(2.13 meters)
328 feet RJ-45
(100 meters)
120