Cable Specifications For Console And Management Connections For The Acx6160; Management Port Connector Pinouts For The Acx6160 - Juniper ACX6160 Hardware Manual

Cable Specifications for Console and Management Connections for the
ACX6160
Table 20 on page 43 lists the specifications for the cables that connect the ACX6160 to a management
device.
NOTE: All RJ-45 connectors must conform to the rules and regulations as described in the FCC
specification 47 CFR Part 68.
Table 20: Cable Specifications for Console and Management Connections for the ACX6160
Port on ACX6160 Cable Specification
Console (CON) RS-232 (EIA-232)
port serial cable
Management Category 5 cable or
(MGMT) port equivalent suitable for
1000BASE-T operation

Management Port Connector Pinouts for the ACX6160

The 10/100/1000BASE-T RJ-45 management port (labeled MGMT) uses an RJ-45 connector to connect
to a management device for out-of-band management.
Table 21 on page 44 provides the pinout information of the RJ-45 management port connector. An
RJ-45 cable is supplied with the ACX6160.
Cable Supplied Maximum Length
2.13-meter-long 2.13 meters
RJ-45 patch cable
and RJ-45 to DB-9
adapter
2.13-meter-long 100 meters
RJ-45 patch cable
43
Device
Receptacle
RJ-45
RJ-45