Table 70: Optical Interface Support For Fast Ethernet Sfp Transceivers - Juniper EX4300 Hardware Manual

EX4300 Switch Hardware Guide

Table 70: Optical Interface Support for Fast Ethernet SFP Transceivers

Ethernet
Standard Specification
100BASE-FX Model number
NOTE: Only the
Rate
SFP network ports
on 32-port
Connector type
EX4300 switches
support Fast
Ethernet SFP
Fiber count
transceivers.
The built-in uplink
Transmitter wavelength
ports or the uplink
module ports do
not support Fast
Minimum launch power
Ethernet SFP
transceivers.
Maximum launch power
Receiver sensitivity
Maximum input power
Fiber type
Core/Cladding size
Fiber grade
Modal bandwidth
Distance
DOM support
Virtual Chassis port
(VCP)-configurable
Software required
120
Value
EX-SFP-1FE-FX
100 Mbps
LC
Dual
1310 nm
–20 dBm
–14 dBm
–31.5 dBm
–8 dBm
MMF
62.5/125 µm
FDDI/OM1
500 MHz/km
2 km (1.2 miles)
Not available
No
EX4300-32F switches—Junos OS for EX Series switches, Release
13.2X51-D15 or later
EX4300-32F-S switches—Junos OS for EX Series switches, Release
13.2X51-D26 or later
Copyright © 2017, Juniper Networks, Inc.