Table 8: PoE Port Features
Feature
Supported standards
Per port power limit
Cable
Connector
Port numbering (hardware)
Port numbering (software)
Gigabit Ethernet SFP Ports
The GE ports described in
NOTE:
On the ACX2000 router, you can use Gigabit Ethernet transceivers in the GE ports, or
you can use 10-Gigabit Ethernet transceivers in the XE ports. Use one set of ports at a time. On
the ACX2100 router, you can use both sets at the same time.
Table 9: SFP Port Features
Feature
Supported standards
Cable
Connector
Port numbering (hardware)
Port numbering (software)
Table 9 on page 53
support small form-factor pluggable (SFP) transceivers.
Description
See the Hardware Compatibility Tool for the specifications of transceivers
supported on the ACX2000 or ACX2100. The list of supported transceivers
for the ACX2000 is located at
https://pathfinder.juniper.net/hct/product/#prd=ACX2000. The list of
supported transceivers for the ACX2100 is located at
https://pathfinder.juniper.net/hct/product/#prd=ACX2100.
ACX2000: 0/2/0 and 0/2/1
ACX2100: 1/1/0 through 1/1/3 and 1/2/0 and 1/2/1
ACX2000: ge-0/2/0 and ge-0/2/1
ACX2100: ge-1/1/0 through ge-1/1/3 and ge-1/2/0 and ge-1/2/1
Description
IEEE 802.3af (PoE) and IEEE 802.3at (PoE+)
65 W
Copper Ethernet LAN cable
RJ-45
0/1/3 POE and 0/1/7 POE
ge-0/1/3 and ge-0/1/7
53