Software Installation; Sw Update: Loading A Sw Patch - AGFA DRYSTAR 5302 Technical Documentation Manual

DD+DIS150.05E
3
3.1
The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.
Edition 1, Revision 0
2005-09-09
Machine specific tools, software tools and auxiliary means

Software Installation

You want to ...
Upgrade the SW to a higher
basic release
Update the SW with a patch
Install SW on a new, empty
hard drive or.
Re-install the software on a
printer in ERROR - SYSTEM
FAILURE state.
• A software upgrade is a functional extension. It is usually sold through
the Sales and Services Channels
• A software update is a corrective modification of the basic software
version. It does not include new functionality. SW Updates (Patches) are
available on MedNet.

SW Update: Loading a SW Patch

This chapter describes the SW Update with a patch.
For instructions regarding SW upgrade to a higher basic release (e.g. SW
Upgrade from SW Rel. 1.80_C1 to 2.0.0_C1) refer to Chapter 7,
Modifications
A SW Update can be performed in two ways:
SW Update via ...
Key-operator menu at the local keypad using the CF card
Service menu in the Webpages using the network
connection
Printed copies of this document are not controlled.
(Type 5366/100)
Example
SW Upgrade from SW Rel.
1.80_C1 to 2.0.0_C1
SW Update from 1.8.0_C1 to
1.8.1_C1
Install SW 1.8.0_C1 on an
empty hard drive
Re-Install SW 1.8.0_C1 on a
printer that does not bootup
anymore.
Drystar 5302
Repair and Service
Refer to .....
Chapter 7,
Modifications
Refer to .....
Chapter 3.2/49
Agfa Company Confidential
3.1
3.2
3.3
3.1.1
3.1.2