Installig Application Software (R4.X.x) - GE LOGIQ 5 PRO Service Manual

GE M S
EDICAL YSTEMS
D 2380207, R
IRECTION EVISION
8-11-2 Installig Application Software(R4.x.x)
8-11-2-1 Installig Application Software(R4.x.x)
1.) Place the "Application Software" CDROM into the CDROM drive.
2.) Press the Start button on the tool bar at the bottom of the screen and select "Run...".
Enter "g:\LoadSoftware" into the dialog box as shown in
3.) You will see a screen that warns you that you are about to load software, press the Y key to
continue. Then the program requests confirmation "Are you sure ?", Press the Y key again..
4.) Press the "Y" key to continue. Then the program requests confirmation - "Are you sure?" then Press
the "Y" key again.
5.) When you are asked to choose the software to install, select L5 Pro. You are also asked to press
"Y" to confirm your selection.
6.) The installation process will be started. it will take about 15 minutes.
8 - 194
7
Figure 8-233 Run Load Software
Figure 8-234
Section 8-11 - Installing Base Software Load Image
Figure 8-233.
Command Window
LOGIQ™ 5 PRO S
ERVICE
M
ANUAL