Major Components Diagram - GE LOGIQ 5 PRO Service Manual

GE M S
EDICAL YSTEMS
D 2380207, R
IRECTION EVISION
Section 5-2
General Information
LOGIQ™ 5 PRO is a phased and linear array ultrasound imaging scanner. It has provisions for analog
input sources like ECG. A Doppler probe may also be connected and used.
The system can be used for:
-
-
-
-
-
LOGIQ™ 5 PRO is a digital beamforming system.
Signal flow travels from the Probe Connector Panel to the Front End Electronics, to the Back-End
Processor, and finally displayed on the monitor and peripherals.
System configuration is stored on the hard drive and all necessary software is loaded from the hard drive
on power up.
Name Plate
Monitor
Monitor Controls
Task Lamp
Power On/Off Switch
TGC Slidepot Knobs
CD-ROM
MOD
ECG Module
Front Bumper
5-2
7
2D Gray Scale and 2D Color Flow Imaging
M-Mode Gray Scale Imaging
Color M-Mode
Doppler
Different combinations of the above modes
Figure 5-1 LOGIQ™ 5 PRO Major Components
Section 5-2 - General Information
Serial Composite
B/W B/W Printer
Power
LOGIQ™5 PRO S
ERVICE
Menu Key Panel Area
Operator Console
B/W Printer
Front Cover
Probe Connector
Swivel Lock & Brake Release
M
ANUAL