Dmc Checks (Dmc User Only) - GE LOGIQ 5 PRO Service Manual

GE M S
EDICAL YSTEMS
D 2380207, R
IRECTION EVISION
8-11-1-3

DMC Checks (DMC User Only)

1.) Check DMC Cable (USB to Serial Bridge).
NOTE: DMC Cable is supplied only as an option.
2.) Plug in the Cable as shown on the right side of the USB port. Refer to Figure 8-230.
3.) Ensure USB to Serial Bridge port is COM4.
4.) Trackball to My computer icon and left click
5.) Right click on Properties.
6.) Right click on the hardware tab.
7.) Right click on the device manager in the middle right of the hardware tab window.
8.) Expand ports (COM & LPT), If not COM4, Proceed as followed.
9.) .Double click "USB to Serial Bridge".
8 - 192
7
DMC Cable
Figure 8-230 DMC Cable
Figure 8-231 Device Manaer Window
Section 8-11 - Installing Base Software Load Image
LOGIQ™ 5 PRO S
ERVICE
Plug on the right
M
ANUAL