GE M
S
EDICAL
YSTEMS
D
2380207, R
IRECTION
EVISION
Chapter 6
Service Adjustments
Section 6-1
Overview
6-1-1
Purpose of this chapter 6
This section describes how to test and adjust the scanner. These tests are optional. You may use them
to check the system for errors.
Table 6-32
Section
6-1
6-2
6-3
6-4
Section 6-2
Regulatory
Verify, where applicable, that any regulatory information or tests required by national law are present
and accounted for, and any regulatory tests required by national law are performed and documented.
Section 6-3
Power Supply Adjustment
6-3-1
LV Unit Disassembly
This system contains three power supply modules; HV unit, LV unit, and ATX PS. However, the LV unit
only can be adjusted.
6-3-1-1
Tools
•
Common pillips screwdrivers
•
Allen/Unbraco wrench
•
Long-nose gripper
6-3-1-2
Needed Manpower
•
1 person, 15 minutes + travel
7
Contents in chapter
Description
Overview
Regulatory
Power Supply Adjustment
Monitor Adjustments
Chapter 6 Service Adjustment
LOGIQ™ 5 PRO S
ERVICE
Page Number
6-1
6-1
6-1
6-4
M
ANUAL
6 - 1