Body Block; Rear Handle - GE LOGIQ 5 PRO Service Manual

GE M S
EDICAL YSTEMS
D 2380207, R
IRECTION EVISION
Section 8-6

Body Block

8-6-1 Rear Handle (FRU No. 400)
Purpose: This is a description on how to remove and replace the Rear Handle.
8-6-1-1 Tools
• Common pillips screwdrivers
• Allen/Unbraco wrench
8-6-1-2 Needed Manpower
• 1person, 25 minutes + travel
8-6-1-3 Preparations
• Shut Down the System and switch off the Main Breaker at the rear as described in section 4-3-2 on
page 4.
8-6-1-4 Removal Procedure
1.) Remove the Left Cover (FRU No.300). Refer to section 8-5-1 on page 41.
2.) Remove the Right Cover (FRU No.301). Refer to section 8-5-2 on page 43.
3.) Remove the Rear Cover (FRU No.302). Refer to section 8-5-3 on page 45.
4.) Remove the Top Cover (FRU No.304). Refer to section 8-5-5 on page 49.
5.) Unscrew four (4) screws (1-4) to remove peri rear bracket. Refer to Figure 8-65.
(1)
(2)
8 - 72
7
Figure 8-65 Removing the Peri Rear Bracket
Section 8-6 - Body Block
LOGIQ™ 5 PRO S
ERVICE
(3)
(4)
M
ANUAL