Monitor S/W Assy (Fru No. 103) - GE LOGIQ 5 PRO Service Manual

GE M S
EDICAL YSTEMS
D 2380207, R
IRECTION EVISION
8-3-4

Monitor S/W Assy (FRU No. 103)

Purpose: This is a description on how to remove and replace the Monitor S/W Assy.
8-3-4-1 Tools
• Common pillips screwdrivers
8-3-4-2 Needed Manpower
• 1person, 10 minutes + travel
8-3-4-3 Preparations
• Shut Down the System and switch off the Main Breaker at the rear as described in section 4-3-2 on
page 4.
8-3-4-4 Removal Procedure
1.) Remove the Monitor Cover Front. Refer to section 8-3-3 on page 8.
2.) Disconnect two connectors (1-2). Refer to Figure 8-10.
3.) Unscrew two screws (3-4) from the Monitor Cover Front. Refer to Figure 8-11.
8 - 10
7
Figure 8-10 Disconnecting 2 cables
4
Figure 8-11 Unscrew 2 screws
Section 8-3 - Monitor
LOGIQ™ 5 PRO S
ERVICE
1
2
3
M
ANUAL