GE M
S
EDICAL
YSTEMS
D
2380207, R
IRECTION
EVISION
Section 8-4
Keyboard Block
8-4-1
KeyBoard Assy (FRU No. 200)
Purpose: This is a description on how to remove and replace the Keyboard Assy.
8-4-1-1
Tools
•
Common pillips screwdrivers.
8-4-1-2
Needed Manpower
•
1person, 15 minutes + travel
8-4-1-3
Preparations
•
Shut Down the System and switch off the Main Breaker at the rear as described in section 4-3-2 on
page 4.
8-4-1-4
Removal Procedure
1.) Remove the Probe Holder (FRU No.202). Refer to section 8-4-3 on page 21.
2.) Unscrew two screws (1-2) from the upper side of the keyboard. Refer to Figure 8-17.
3.) Unscrew three screws (3-5) from the bottom of the keyboard. Refer to Figure 8-18.
8 - 16
7
1
Figure 8-17 Unscrew two screws on the shoulder
4
3
Figure 8-18 Unscrew 3 screws from the bottom
Section 8-4 - Keyboard Block
LOGIQ™ 5 PRO S
2
5
M
ERVICE
ANUAL