Op Curtain Cover (Fru No. 311) - GE LOGIQ 5 PRO Service Manual

GE M S
EDICAL YSTEMS
D 2380207, R
IRECTION EVISION
8-5-12

OP Curtain Cover (FRU No. 311)

Purpose: This is a description on how to remove and replace the OP Curtain Cover.
8-5-12-1 Tools
• Common pillips screwdrivers
• Allen/Unbraco wrench
8-5-12-2 Needed Manpower
• 1 person, 25 minutes + travel
8-5-12-3 Preparations
• Shut Down the System and switch off the Main Breaker at the rear as described in section 4-3-2 on
page 4.
8-5-12-4 Removal Procedure
1.) Remove the Left Cover (FRU No.300). Refer to section 8-5-1 on page 41.
2.) Remove the Right Cover (FRU No.301). Refer to section 8-5-2 on page 43.
3.) Remove the Front Base Cover (FRU No.305). Refer to 1.) on page 8-40.
4.) Remove the Front Cover (FRU No.306). Refer to section 8-5-7 on page 53.
5.) Remove the OP Side L Cover (FRU No.307). Refer to section 8-5-8 on page 54.
6.) Remove the OP Side R Cover (FRU No.308). Refer to section 8-5-9 on page 56.
7.) Remove the OP Bottom Cover (FRU No.310). Refer to section 8-5-11 on page 60.
8.) Unscrew 8 screws from the OP Curtain Cover. Refer to Figure 8-59.
8 - 62
7
OP Bottom Cover
(1)
(7)
(4)
Figure 8-59 Unscrew 6 screws to remove the OP Curtain Cover
Section 8-5 - Covers
(2)
OP Curtain Cover
(5)
LOGIQ™ 5 PRO S
ERVICE
(3)
(8)
(6)
M
ANUAL