Application S/W Install - GE LOGIQ 5 PRO Service Manual

GE M S
EDICAL YSTEMS
D 2380207, R
IRECTION EVISION
8-8-1-15

Application S/W Install.

After Checking Device Driver and then Install application S/W by inserting CD into CD RW Driver.
1.) Press the "Y" key to continue. Then the program requests confirmation - "Are you sure?"
then Press the "Y" key again.
2.) The installation process will be started. it will take about 15 minutes.
3.) To apply the preset by region, select one of the below options. Refer to Figure 8-147.
4.) Select fit Region as Below Menu.
5.) When the process has completed, you will see the following message.
6.) After the installation is complete, the system will power off automatically.
• If possible remove the CD from the drive while the system is rebooting.
8 - 138
7
Figure 8-146 Installation Application Software
Figure 8-147
Figure 1-148 Complete message
Section 8-8 - PC Block
LOGIQ™ 5 PRO S
Select Region
M
ERVICE ANUAL