Capturing A Screen - GE LOGIQ 5 PRO Service Manual

GE M S
EDICAL YSTEMS
D 2380207, R
IRECTION EVISION
7-4-3

Capturing a Screen

The following is a generic process to capture any screen from the scanner:
1.) Navigate to and display the image/screen to be captured.
2.) Press P4. This will place a snapshot of the screen on the "clipboard" displayed at the bottom
Clipboard
Thumbnai
3.) Highlight the snapshot to be stored to the system hard drive, MOD or CD-R.
4.) Select Menu on the right side of the image screen, then highlight and select SAVE AS.
7
of the scan image display.
Figure 7-3 Select Image to Capture
Figure 7-4 Menu > Save As
Chapter 7 Diagnostics/Troubleshooting
LOGIQ™ 5 PRO S
ERVICE
Menu
Save As
M
ANUAL
7 - 7