Setting The Vcr (If Necessary) - GE LOGIQ 5 PRO Service Manual

GE M S
EDICAL YSTEMS
D 2380207, R
IRECTION EVISION
8-11-3-4

Setting the VCR (if necessary)

1.) Press Utility > System>Peripheral.
2.) Set the proper parameters:
-
-
-
3.) Click on Save.
4.) Shut down the scanner, then restart the scanner.
5.) Verify that the VCR can be properly operated (remote, play...).
Be sure to connect the converter and cable before booting up the system. Otherwise the LOGIQ 5
NOTICE
system does not recognize the peripheral devices
7
PAL or NTSC
VCR type
Source type
Figure 8-244 Utility > System>Peripheral
Chapter 8 Replacement Procedures
LOGIQ™ 5 PRO S
ERVICE
M
ANUAL
8 - 201