Smps Assy, Hard Disk, Cd R/W (Fru No. 601, 602, 603) - GE LOGIQ 5 PRO Service Manual

GE M S
EDICAL YSTEMS
D 2380207, R
IRECTION EVISION
8-8-3

SMPS Assy, Hard Disk, CD R/W (FRU No. 601, 602, 603)

Purpose: This is a description on how to remove and replace the Parts in the BEP Assy.
8-8-3-1 Tools
• Common pillips screwdrivers
8-8-3-2 Needed Manpower
• 1 persons, 15 minutes + travel
8-8-3-3 Preparations
• Shut Down the System and switch off the Main Breaker at the rear as described in section 4-3-2 on
page 4.
• Left Cover should be removed before proceed. Refer section 8-5-1 on page 41, section 8-5-13 on
page 64.
8-8-3-4 Removal Procedure
1.) Open front base cover and front cover. Refer section 8-5-6 on page 51, section 8-5-7 on page 53.
2.) Remove PC top fix bracket and scan EMC bracket. Refer Figure 8-158.
3.) Open the BEP metal cover
8 - 144
7
P C T o p F ix B ra c k e t P C T o p F ix B ra c k e t
1 1
3 3
Figure 8-158 ATX SMPS Replacement
Section 8-8 - PC Block
2 2
S c a n E M C B ra c k e t S c a n E M C B ra c k e t
4 4
5 5
6 6
7 7
8 8
LOGIQ™ 5 PRO S
ERVICE
M
ANUAL