GE M
S
EDICAL
YSTEMS
D
2380207, R
IRECTION
EVISION
8-10-5-3
Saving Connectivity
Before starting upgrade, write down the Connectivity Setting for back-up.
1.) Press Utility > Connectivity and click the Tcpip tab.
2.) Write down the following parameters:
Parameters
Computer Name
Enable DHCP
IP-Address
Subnet Mask
Default Gateway
Remote Archive IP-Addr
Remote Archive Name
Note : For a stand-alone system, preset values of IP address, subnet mask, and default gateway, shown
above, must entered.
8 - 170
7
Descriptions (Entry for Stand-Alone System)
Figure 8-189 Connectivity
Section 8-10 - Software Loading Procedure
LOGIQ™ 5 PRO S
ERVICE
M
ANUAL