Standard Confirmation & Functional Checks - GE LOGIQ 5 PRO Service Manual

GE M S
EDICAL YSTEMS
D 2380207, R
IRECTION EVISION
8-11-3 Standard Confirmation & Functional Checks
Configure the system settings and perform functional checks after installation of software.
Items for configuration and functional checks include:
-
-
-
8-11-3-1 Confirmation of Software Version
1.) Press the Utility button on the Front panel
2.) Click on the "System" tab and move the mouse over the "About" tab. The software version will be
shown on the monitor as shown. Confirm the following.
3.) Make sure that Software Version: R4.x.x and Software Part Number is described on the Application
CD-ROM.
8 - 196
7
Confirmation of the software version
Setting Computer Name
Functional Checks for ServicePlatform (Diagnostic Program)
Figure 8-236 Confirmation of software version
Section 8-11 - Installing Base Software Load Image
LOGIQ™ 5 PRO S
ERVICE
M
ANUAL