Detecting Punch Waste Full - Lexmark X95 series Service Manual

Hide thumbs Also See for X95 series:

Table of Contents

The punch unit motor is rotated forward or reversely for each sheet of media, which is triggered by the sensor

(punch cam front) being turned on/off.

Sensor (punch hole select)

Detecting punch waste full

Punch waste is stored in the punch waste box.

A sensor is provided to detect punch waste full.

When punch waste full is detected, it is notified to the operator only once.

Even if punch waste is not removed, the finisher can still punch media. However, it can spread punch waste

inside the machine.

Pin position

Sensor (punch cam front)

Sensor (punch unit HP)

Punch unit motor

Diagnostic aids