Sensor (Tray Module Feedout) Removal - Lexmark X95 series Service Manual

Sensor (tray module feedout) removal

This removal procedure applies to all three tray modules.
Open the left door.
1.
Remove the two screws (A) securing the metal guide to the machine.
2.
Remove the metal guide.
3.
Remove the tray module upper media transport roller. See the
4.
on page 4-286.
Remove the screw (B) securing the plastic bracket to the machine.
5.
"Tray module transport rollers removal"
Repair information
7558-xxx
Previous
Next
Go Back
4-273