Hcf Rear Cover Removal; Hcf Sensor (Hcf Media Size) Removal - Lexmark X95 series Service Manual

HCF rear cover removal

Remove the four screws securing the HCF rear cover (A) to the unit.
1.
2. Remove the HCF rear cover (A).

HCF sensor (HCF media size) removal

Note: This procedure can be applied to HCF sensor (media size L) and the HCF sensor (media size R).
Remove the HCF media tray. See
1.
2. Remove the HCF top cover. See
Remove the HCF rear cover. See
3.
4. Disconnect the connector from the sensor (HCF media size R) (A) or the sensor (HCF media size L) (B).
Release the hooks securing the sensor (HCF media size R) (A) or the sensor (HCF media size L) (B) to the
5.
unit.
A
"HCF media tray assembly removal" on page
"HCF top cover removal" on page
"HCF rear cover removal" on page
7558-xxx
4-436.
4-446.
4-441.
Repair information
Previous
Next
Go Back
4-441