Table of Contents
Advertisement
Step
Action and questions
3
Is the sensor (stacker bin no
media) properly connected?
Check the sensor (stacker bin
4
level R) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch FINISHER SENSOR
TESTS.
4. Touch Sensor (Stacker bin
level 1).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (stacker bin
5
level R) for proper connection.
Is the above component
properly connected?
Check the sensor (stacker bin
6
level F) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch FINISHER SENSOR
TESTS.
4. Touch Sensor (Stacker bin
level 2).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (stacker bin
7
level F) for proper connection.
Is the above component
properly connected?
Check the sensor (stacker bin
8
level encoder) for proper
operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch FINISHER SENSOR
TESTS.
4. Touch Sensor (Stacker bin
level encoder).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Yes
Replace the sensor (stacker bin
no media). Go to
"Sensor
(stacker bin upper limit) or
sensor (stacker bin no media)
removal" on page
4-403.
Go to step 6.
Replace the sensor (stacker bin
level R). Go to
"Sensor (stacker
bin level R) removal" on
page
4-402.
Go to step 8.
Replace the sensor (stacker bin
level F). Go to
"Sensor (stacker
bin level F) removal" on
page
4-401.
Go to step 10.
7558-xxx
No
Replace the connection.
Go to step 5.
Replace the connection.
Go to step 7.
Replace the connection.
Go to step 9.
Diagnostic information
Previous
Next
Go Back
2-185
Advertisement
Table of Contents
